Setting Up Duplexing Printer

Using a duplexing printer (one that automatically handles double-sided printing) with ClickBook is easy. ClickBook sends out only one print job for both the front and back sides, so you skip the step of reinserting the printout stack and then printing the second print job.

Follow these steps to prepare your duplexing printer:

1. First, make sure that the printer is installed in your Windows system
2. While in standalone mode, go to File on the menu bar and click on ClickBook Printer Setup.
3. Choose your printer model from the Printer list. Please ensure that you have already setup your printer to work with ClickBook. If you have not, please follow the Easy Printer Setup instructions to do so, before moving onto step 4.
4. Click the Properties... button
5. Choose Automatic duplexing.
6. Select the printer style. There are 4 different styles of duplexing printers. They are:
   
   Style 1 - Standard duplexing is the most common duplex style. This is the default setting. Duplexing is based on the orientation of paper where short edge represents the horizontal edge.
   
   Style 2 - The Reverse Duplexing style is the opposite of "Style 1". Commonly used by PostScript drivers. Duplexing is based on the orientation of the paper where long edge represents the horizontal edge.
7. Click OK.

Note: If you are printing a booklet with ClickBook, and you only use a duplexing printer, ignore any Help that concerns reinserting the paper before printing the second side.